Datalog 4 now incorporates a software driver to connect to Netiom UDP Input / Output modules. The software driver allows Datalog 4 to accept and reset circuit alarms and monitor for board faults.
The Netiom provides a cost effective and simple solution where only a small number of alarm inputs need to be monitored or outputs switched. Ouputs can be switched manually via on screen icons or automatically upon alarm on Datalog.
Netiom-UDP consists of: –
- 16 Digital Inputs
- 16 Digital Outputs
- 1 Serial Port
- 1 Ethernet Port
Netiom-UDP will work on both local networks and wide area networks over the Internet.